Mai Haɗin Rarraba Ta atomatik
Aiki
Don samun Cross Partition ta atomatik a cikin babban inganci da adana farashin aiki da yawa.
Samfurin Ƙarfafawa
Lissafin Ƙayyadaddun Na'ura ta atomatik
Halin tsari
* Tsawon tsayi da zanen gado a kwance suna shigar da decussation.
* Saka kowane nau'in allo da toshe ta atomatik
* Tare da na'urar gano kuskure, tsaya idan takardar ta maƙe
Tech.parameter
| Samfura | Girma (L x W x H m sun haɗa da isar da takarda) | Jimlar iko |
| 450-3L | 7.3×2.0×1.9 | 7 |
Lissafin faifai
| Suna | Naúrar | Bayanai |
| Faɗin shigar a kwance: A | mm | 120-900 |
| Tsawon zanen gado: B | mm | 210-450 |
| Tsawon Clapboard: C | mm | 70-300 |
| Nisa a kwance a kwance: D | mm | 20-400 |
| Tsawon tsayin allo: E | mm | 45-850 |
| Taswirar Lengthways A'a. | yanki | 1-6 |
| A kwance allon tafawa No. | yanki | 1-21 |
| Katin shigar da faɗin baki: F | mm | Kaurin allo |
| Karton kauri: G | mm | 1.5-8 mm |
Kwamitin rabon gwaji yakamata ya cika waɗannan buƙatu
Partition board gyare-gyare: mutu yankan gyare-gyare
Tazarar allon allo yakamata ya kasance yana buɗe bevel/buɗe (kamar yadda aka nuna a adadi mai zuwa)
Abokin cinikiShirya
1. Air matsa lamba: Aiki al'ada 0.4-0.8Mpa
2, Power Bukatun: 380v 50Hz Uku-lokaci hudu-waya tsarin
3, Electric waya bukatar shiga aiki hukuma, da pneumatic bututu bukatar shiga zuwa babban pneumatic bututun.
4. Gwajin inji amfani da mutu-yankan-clapboard
5.Machine amfani mai mai da maiko
6. Aikin assasa.